Operating Instructions For Common 3-Number Dial Safe Locks

Please read these instructions thoroughly before operating the lock.

At the top of the dial ring, an index is provided for normal dialing and opening. At the side of the opening index, a changing index is provided for use only when setting a new combination.

For this precision lock, extreme care must be used to align the combination numbers with the index.

Turn the dial slowly and steadily. If, after turning the correct number of revolutions, any number is turned beyond the index, the entire series of combination numbers must be re-dialed. DO NOT TURN BACK TO REGAIN A PROPER ALIGNMENT WITH THE NUMBERS. Each time a selected number is aligned with the opening index, a revolution is counted.

TO UNLOCK ON A FACTORY SETTING

To unlock on factory setting, turn dial left 4 turns, stopping on 50. Turn dial right until bolt retracts.

TO UNLOCK ON A 3 NUMBER COMBINATION

For Example "50-25-50"

  1. Turn dial to the LEFT, stopping when "50" is aligned with the opening index, the FOURTH time.
  2. Turn dial to the RIGHT. stopping when "25" is aligned with the opening index, the THIRD time.
  3. Turn dial to the LEFT, stopping when "50" is aligned with the opening index, the SECOND time.
  4. Turn dial slowly to the RIGHT until the bolt retracts.

TO LOCK

Turn dial to the LEFT at least four full revolutions.

CAUTION: BEFORE CLOSING THE UNIT, try the new combination several times, using the opening index.

Provided by SARGENT & GREENLEAF. INC., 1 Security Drive, Nicholasville, Kentucky 40356 630.112